1990 VW Corrado 1.8t 20vt

Post Reply
yotam106gti
MegaSquirt Newbie
Posts: 8
Joined: Fri Jun 29, 2007 1:51 am

1990 VW Corrado 1.8t 20vt

Post by yotam106gti »

Car: VW Corrado (originaly G60)
Engine: 1.8t 20VT Transplant from Audi A3 (AUQ)
Turbo: K03 (from Seat Ibiza)
MS: Ms1 V3 Extra-code
Spark System: Wasted Spark, Two VB921
Injector System: Bank
Coil: 2 Twin VW coils from Audi A8
Injectors: Volvo 310CC bosch Injectors
Throttle: Mechanicl Throttle from Golf 1.8t (AGU)
Vr Sensor: Stock (AUQ)
IAT: Stock (AUQ)
CLT: Stock (AUQ)

Image
Image
Image

http://www.youtube.com/watch?v=UkwuJoX1f1g

The car started and now in tuning stage. there isn't any throttle linkage
so it cant be driven.

Soon First MSQ, Driving films.
amstrange1
MegaSquirt Newbie
Posts: 1
Joined: Wed Mar 01, 2006 2:57 pm

Post by amstrange1 »

Nice install. Are you using MS1 to control the boost solenoid (N75 valve)?
yotam106gti
MegaSquirt Newbie
Posts: 8
Joined: Fri Jun 29, 2007 1:51 am

Post by yotam106gti »

not right now.
the motor came without one, and althoug i have one the owner of the
car doesn't want boost controller from megasquirt.
chadr
MegaSquirt Newbie
Posts: 2
Joined: Sat Aug 13, 2005 5:45 pm

Post by chadr »

what is involved in fitting that engine into a corrado? is it a very simple swap?
90 VW 16v Jetta - MSnS-Extra, current msq, setup, and pics viewtopic.php?t=22406
johntorg
MegaSquirt Newbie
Posts: 1
Joined: Fri Nov 16, 2007 1:26 pm
Location: Beaufort, SC

Megasquirt Questions

Post by johntorg »

I have a similar car, a 91 Corrado with a 180HP Audi TT engine, but running a T3/T4 Turbo. I am currently running a chiped Passat ECU, but would like to convert to Megasquirt. I have a V3 with one VB721. I have been looking for a description of how to mount the 2nd VB721 and haven't found t. I would appreciate it if you could either point me at a link to a picture of a multi VB721 install of describe how you did it. My heatsink is completely full on the component side.

Thanks for your help.
hsbr
MegaSquirt Newbie
Posts: 5
Joined: Fri Feb 27, 2009 11:34 pm

Re: 1990 VW Corrado 1.8t 20vt

Post by hsbr »

What are you guys using for a ISV on your 1.8t's?
Post Reply