Page 1 of 1

'85 Golf VR6

Posted: Thu Aug 25, 2011 11:21 am
by JRaptor2000
Got my '85 Golf VR6 wired up and fired up yesterday.

Running MS1 V3, HR10g
Distributor motor
Short runner intake manifold
Stock fueling

Started up first try with Paul_VR6's "Timrunning5.msq".

Anyone know how to get the AEM UEGO to read correctly with tunerstudio? Would really like to be able to use the AFR target table...

Re: '85 Golf VR6

Posted: Sun Sep 11, 2011 4:16 am
by einsereier
0-5v analog output Gasoline values from 10 to 20:1 AFR
found this info on the aem uegocontroller.
i guess you can use the lc1 wideband setting.

Re: '85 Golf VR6

Posted: Wed Aug 15, 2012 1:28 am
by king
can you show me how you connected the cables to the coilpack ? , i have spark A,B,C from MS, my guess is that they should be connected to the three center pins at the coilpack but i dont know witch one ?

Re: '85 Golf VR6

Posted: Wed Aug 29, 2012 5:19 am
by Paul_VR6
The coilpack trigger wires go in the same order as the wire locations pairs on the towers. 1/6=a, 2/5=b, 3/4=c