1995 GTI - 3.2L 24v VR6 on MS3
Re: 1995 GTI - 3.2L 24v VR6 on MS3
Advance table isn't dyno tuned (at all) but is a pretty good representation of a reputable tuner's 'chip tune' advance table. Good place to start. Also this is on reg 93 octane pump. This motor does NOT like a whole lot of advance, especially when the intake is advanced. I need to take 4-5deg out from 20F to 100F intake temp in addition to using a little less initial over the 12v.
1995 GTI VR6 12.833@105
2.8l 12v on MS1-3.57/HR10G - retired
3.2l 24v on MS3 - beta test completed - retired
??? on MS3/3x/IOx/? next up...K&P Performance - KPTuned.com
-
- MegaSquirt Newbie
- Posts: 1
- Joined: Sat Aug 07, 2010 8:00 am
Re: 1995 GTI - 3.2L 24v VR6 on MS3
Re: 1995 GTI - 3.2L 24v VR6 on MS3
1995 GTI VR6 12.833@105
2.8l 12v on MS1-3.57/HR10G - retired
3.2l 24v on MS3 - beta test completed - retired
??? on MS3/3x/IOx/? next up...K&P Performance - KPTuned.com
Re: 1995 GTI - 3.2L 24v VR6 on MS3
sounds arsome paul , keep me posted (mr powernut )think im going to call myself a vr recker