Has anyone tried MS on the Yamaha 3.0 or 3.2 of the SHO?
-
- MegaSquirt Newbie
- Posts: 1
- Joined: Tue Feb 13, 2007 5:05 pm
Has anyone tried MS on the Yamaha 3.0 or 3.2 of the SHO?
I'm now considering going to a single turbo (a lot of guys with Extreme Performance buggies with this motor turbo'd "supposedly" are getting close to 600 hp). Since this will be a major overhaul of the plumbing, I'm thinking it would be an ideal opportunity to convert to a MS system.
Has anybody here heard of anyone that might have done a MS system on a Ford Taurus SHO motor.
Thanks for any insight.
Tom
SHO
-
- MegaSquirt Newbie
- Posts: 2
- Joined: Fri Feb 01, 2008 9:48 am
- Location: Union, NJ
Has there been any follow-up on this? I recently bought a '91 SHO, and have plans to swap the motor into something else, and go with MS.
I posted a question about the trigger wheel on SHOforum.com a long time ago, and this is the answer that I got:
"The trigger on the SHO motor is a 3 vane hall effect that uses a 1 vane
hall effect sensor on one of the cam shafts to determine TDC. Some one on
here mentioned trying to use the Megasquirt system, not sure of what became
of it."
It sounds like the SHO motor does not have a trigger wheel/VR sensor setup... I recall seeing a "DIS" module on the crossover tube on the SHO motor, but I'm not sure if this is the same as EDIS. (The SHO does use a coil pack)
-
- MegaSquirt Newbie
- Posts: 9
- Joined: Thu Nov 26, 2009 4:23 pm