Page 1 of 1
Opel Vectra 2000 c20xe
Posted: Sat Dec 22, 2007 3:49 pm
by GeorgeGt
Opel Vectra 2000
engine: c20xe 110kw/150hp stock 16 valve
Currently running custom intake and exhaust manifold
Perfomance:0-60 km/h 7.1 sec 400m 15.1 sec 152km/h
currently running MSI on 3.0 board with msnextra code.
Posted: Fri Feb 15, 2008 2:05 am
by nyabinghi
Congratulation, good work!
Can you post some pics of your custom intake and exhaust ?
Posted: Mon Feb 18, 2008 12:01 pm
by Mister.x
Re: Opel Vectra 2000 c20xe
Posted: Thu Jul 10, 2008 2:51 pm
by ruirito
hello,
Congratulations.
Are you using OEM coil pack?
Re: Opel Vectra 2000 c20xe
Posted: Tue Aug 19, 2008 2:06 am
by GeorgeGt
Hi , engine is in rebuild now. This is the old pic with custom intake and new coilpack (should be the same as on late XE`s)
Re: Opel Vectra 2000 c20xe
Posted: Tue Aug 19, 2008 2:27 am
by GeorgeGt
And if anyone is wondering about the spark settings , c20xe and as far as i know , all 2 litre engines from opel have tooth nr 20 under vr sensor when engine is at TDC. And 2.5 and 3.0 litre v6 engines have tooth nr14 under vr sensor when engine is at TDC (if i remember correctly
). And spark settings for MS1 2litre are 10/19/40/49 and v6 engines are 4/13/24/33/44/53
Re: Opel Vectra 2000 c20xe
Posted: Fri Oct 10, 2008 2:11 am
by Mister.x
Hi,you've got a little mistake about your TDC MS1,for C20XE i found 11/20/41/50 tooth n°20 and for all V6 opel-vauxhall i found 5/14/25/34/45/54 tooth n°14.And for MS2 C20XE is: 114° and V6 is: 120°
