5.7 Hemi Crate Engine
Posted: Wed Feb 13, 2008 8:11 am
5.7 Hemi Crate Engine up and running MS1 V3 with 8 VB921's firing stock coils and 16 spark plugs. Utilizing stock crank trigger wheel and stock hall sensor with boost junkie's NGC code variant. Fuel and air enter through a set of 8 individual Hilborn Throttle bodies (the first set on a running engine as far as I know).
It's looking good after initial runs on engine stand. Lots of tuning to do but very positive.......log looks good.
I wish it weren't winter here.
Big thanks to Shawn (boost junkie).
Here's a few pics on the stand..........nothing on the motor is finished yet but it'll be looking good soon..........going to Detroit Autorama in 18days!!!
I'll update the pics once the motor is in the car.
Also, here is my msq..........very rough tune......but running. This msq will not work with a stock hemi crate engine. This motor has a very big cam. However the ignition settings would be the same.
It's looking good after initial runs on engine stand. Lots of tuning to do but very positive.......log looks good.
I wish it weren't winter here.
Big thanks to Shawn (boost junkie).
Here's a few pics on the stand..........nothing on the motor is finished yet but it'll be looking good soon..........going to Detroit Autorama in 18days!!!
I'll update the pics once the motor is in the car.
Also, here is my msq..........very rough tune......but running. This msq will not work with a stock hemi crate engine. This motor has a very big cam. However the ignition settings would be the same.