2004 Silverado Vortec 8.1 MSD LS1 ignition MS II efi

For vehicles not yet running, but in the process of converting to MegaSquirt (ask a moderator to move your thread once you are running).
Post Reply
xx_ED_xx
MegaSquirt Newbie
Posts: 2
Joined: Sun Apr 16, 2006 6:56 am
Location: Florida
Contact:
Contact xx_ED_xx

2004 Silverado Vortec 8.1 MSD LS1 ignition MS II efi

Post by xx_ED_xx »

Here is a project link....
http://www.fullsizechevy.com/forums/sho ... p?t=376372
Just bought a MS II from DIYautotune.com
So hope to have this thing running this weekend. If everything comes in.
I also plan on putting a similar motor in my 1993 trans am with the same setup to run it. :yeah!:
Top
xx_ED_xx
MegaSquirt Newbie
Posts: 2
Joined: Sun Apr 16, 2006 6:56 am
Location: Florida
Contact:
Contact xx_ED_xx

Re: 2004 Silverado Vortec 8.1 MSD LS1 ignition MS II efi

Post by xx_ED_xx »

Got It up and running. To use the MSD ls1 BOX on a vortec 8100 you need to repin the cam and crank sensor plugs. You will swap pin a to pin c on both sensors. One slight modification to the cam sensor plug and presto you are set to run. Well back to tuning :RTFM:
Top
Post Reply

Return to “Projects”