MS2 VR6 AAA OBD2 n/a
Posted: Sun Feb 21, 2010 12:36 pm
Car is a mk2 golf with odb2 vr6 AAA
MS2
Mods:
Maf delete
intake
Manifold back exhaust
Well worked on my map and finally got it running pretty good now , few small stumbles around town driving but will try and clear them up and update as i go.
Took the car to the track and ran a 15.0 with 2.8 60 ft no tach and 5 degrees to 10 degrees pulled off my up top end timing until i can get some sort of knock sense.
Obviously take no responsibility for anyone using my map but should be good enough to get you running.
Will update with a dyno map later in the month
Thanks to paul ,and others who have posted there maps up here as helped me get mine running.
pic of the car:
MS2
Mods:
Maf delete
intake
Manifold back exhaust
Well worked on my map and finally got it running pretty good now , few small stumbles around town driving but will try and clear them up and update as i go.
Took the car to the track and ran a 15.0 with 2.8 60 ft no tach and 5 degrees to 10 degrees pulled off my up top end timing until i can get some sort of knock sense.
Obviously take no responsibility for anyone using my map but should be good enough to get you running.
Will update with a dyno map later in the month
Thanks to paul ,and others who have posted there maps up here as helped me get mine running.
pic of the car: