1995 240SX with Toyota Supra 2JZ Motor

Dennis240 · Post by **Dennis240** » Wed Mar 09, 2005 4:48 pm

Here it starts:

I'm doing it for one of a kind factor

While waiting for MSII and V3.00

---------------Goal HP----------------------
With a T61 size turbo, ss tube manifold, 3.5inch exhaust.
~450whp
----------------------------------------------

--Electrical

The fuse box is moved to the trunk

MSD Knock Alert

LM-1 WideBand

225lph Fuel pump

--Body

Dash pulled and all interior

The roof is getting cut off to be replaced with a '84 300ZX T-Top roof.

300ZX Front brake calipers and rotors

The fuel lines routed to the other side of the car bacuse the exhaust on the 2JZ is on the other side.

Getting a limited-slip-diff

350Z Stock wheels

--Engine

2JZ-GE non-Turbo Supra motor

Stainless tubular turbo manifold

Got all the EDIS 6 goodies

Flywheel milled to accept the 240SX clutch disk. Will be a twin disk clutch system.

Motor getting 2JZ-GTE(turbo) pistons and/or ~3mm copper head gasket.

Making a custom intake manifold, the stocker looks weird

I'm going to use the stock 240SX 5 speed tranny.
-----------------------------------------------------------------
I will be adding info and pics as I progress with the project, ENJOY!!

Dennis240 · Post by **Dennis240** » Fri Mar 11, 2005 7:34 pm

Finally got the pics to work

Click the link!

PM me if you got a comment

http://web.tampabay.rr.com/vizoita/240SX%20Project.html

Dennis240 · Post by **Dennis240** » Mon Mar 14, 2005 6:42 pm

Right now I'm working on a another '95 240SX with a built motor and Garrett t3/t4 turbo, 480cc injectors, SAFC for fuel, walbro fuel pump, big front mount IC, blow through MAF, Tial wastegate

I think on moday this one will drive away, finally. Intercooler piping is unbalevable so much work to make it all fit nice!!!!!! :]

I'll be adding more pics next week, had no time to do it this week cuz of this car.

March 22
Got this car finished and running good enought to drive. Still need hours of tuning but the open wategate sounds good

Here are some pics here:
http://web.tampabay.rr.com/vizoita/240SX%20Project.html

Dennis240 · Post by **Dennis240** » Sat Mar 19, 2005 7:08 pm

Just recived the alum crank pully will put the trigger wheel on it and start the motor to see how it runs. I'll do a little video and post it up next week

Dennis240 · Post by **Dennis240** » Thu Mar 31, 2005 8:37 pm

I have a lot of work right now to catch up with, But got the crank pully mounted atleast.

Dennis240 · Post by **Dennis240** » Wed Apr 06, 2005 5:46 pm

I got engine runing/idling on just EDIS today, so cool to see an engine runing out of the car sitting on a cart

I didn't bring the camera cuz I didn't think it would be so easy to get it runing on the first day try!

I'm as happy as can be!!!!!

Got the videos on the site.

http://web.tampabay.rr.com/vizoita/240SX%20Project.html

Dennis240 · Post by **Dennis240** » Wed Apr 20, 2005 4:20 pm

The project is moving along full speed.

Got, Turbo Pistons (8.5:1 CR) and Rods. Stock is 10:1CR
Also a 500 ft-lb Pressure Plate for the clutch.

Dennis240 · Post by **Dennis240** » Sun Apr 24, 2005 6:44 pm

Waiting for the V3 board

I hope its out soon so I can get the thing on the road.

Dennis240 · Post by **Dennis240** » Sat May 07, 2005 4:46 pm

Instead of just waiting for the V3 board I bought all the MSI and V2.2 stuff:

V2.2 Board + CPU
MegaView
StimBoard
RelayBorad
All small parts

All the stuff came in on Friday the 13th

SO MUCH stuff!

Dennis240 · Post by **Dennis240** » Mon May 16, 2005 7:15 pm

Soldering everything

I hope the 1lbs of solder is enough

But it's fun