Page 1 of 1

Pat Carlier 1989 Audi100

Posted: Wed May 26, 2004 8:11 am
by mitsuko
Name: Patrick Carlier

Vehicle: 1989 Audi 100

Engine: 2.3 L 5cyl , code AAR

Injection: conversion from cis to efi .

Throttle body: stock with homemade tps mount

Sensors: Bosch CLT , stock location .
ND IAT , in the manifold
DIY-WB O2 sensor

Ignition: Stock


Engine runs on lpg all the time . This destroyed the cis , it's all clogged .
MS was the perfect sollution , as the car has to run once a year on gas
to pass emissions .

Details
Junkyard bosch tps mounted on the stock TB
Dito iat and clt
Homemade aluminium injector inserts , using stock location
Homemade fuel rail from copper tube and machined bits and pieces .
214 cc/min hi imp injectors taken from some peugeot .
Cis still in control of ign timing , for now .
Homemade singlesided megasquirt .
Homemade megaview with lcd .

Started on the first crank !

Feels great .


Projects to come :
Get rid of the cis to control ign timing Probably emulate the load signal
SS fuelrail . The copper works , but doesn't look to great .
Alcohol as fuel instead of gasoline .
LPG injection if ever i can find dry gas injectors .

Re: Pat Carlier, 1989 Audi100

Posted: Mon May 23, 2011 6:05 am
by dgacampbell
Hi there,
I know it has been a lot of years from this was posted lol
I was wondering if you could tell me how you got on?
i have an audi 90 with the 2.3 10v engine also, and i want to convert it to efi!
So any advice or information, on what exactly you did, and parts used, work done etc would really be a help!
If you can spare the time.
Many thanks
Dan.
N.ireland.

Re: Pat Carlier, 1989 Audi100

Posted: Tue May 24, 2011 10:24 am
by mitsuko
I don't understand , all parts I used are mentioned in the topic .
What else can I say .

Car ran very good for several years as a Bi-fuel car .
Had over 250.000 km's .
Now it's long gone

One advice I can give you is to try and dump the NG ignition .
With the K-jet gone , the timing is off , and there's no real good way to get it right again .
Use a vacuum vacuum setup from a KV or similar engine .
Or use MS to drive control the ign timing and re map it .

Pat