Denis O'Brien - mini clubman(1.4 16v rover k-series Turbo)
Denis O'Brien - mini clubman(1.4 16v rover k-series Turbo)
Vehicle: mini clubman (leyland, 1983!?)
Engine: Engine size (1.6L), configuration (I4), standard so far, apart from 2 wire PWM IACV and ford toothed wheel and VR sensor
Injection: standard MPi manifold injectors and sensors
Description: Car is in daily use, and i can swap between mems and megasquirt when needed for debugging etc.
Website: http://www.16vminiclub.com/forums/viewtopic.php?t=1883
megasquirt info starts on page 2.
![Smile :)](./images/smilies/icon_smile.gif)
![Smile :)](./images/smilies/icon_smile.gif)
running the msns-e extra code and larger injectors and car runs like a dream!
![Smile :)](./images/smilies/icon_smile.gif)
engine was stripped for inspection after the above power run and everything was in tip-top shape, not even the slightest sign of detonation, engine is now back together and being used daily, weather permitting.
![Image](http://images27.fotki.com/v968/photos/5/512767/1800150/28072007150-vi.jpg)
Showing coils, the bodyshell also recieved a nip and tuck at this point.
![Image](http://images27.fotki.com/v973/photos/5/512767/1853939/IMG_05901-vi.jpg)
original engine build, with the rover coupe turbocharger it made 200hp / 170ft/lb@1bar of boost.
![Image](http://images115.fotki.com/v685/photos/5/512767/1853939/IMG_05911-vi.jpg)
same again, first fit of turbocharger, before boost hoses and lines were ran
![Image](http://images23.fotki.com/v870/photos/5/512767/1800150/IMG_0695-vi.jpg)
home made uprated clutch with twin pressure plates, so far so good
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Smile :)](./images/smilies/icon_smile.gif)
Re: Denis O'Brien - mini clubman(1.4 16v rover k-series Turbo)
http://www.youtube.com/watch?v=GbakzlZ9Wdo
http://www.youtube.com/watch?v=izksrjOKmfQ
Still on the ms1 -extra-hires code, may have to swap over to the ms2 cpu shortly when i moove to bigger injectors to try keep a sane idle.
![Smile :)](./images/smilies/icon_smile.gif)