Kris, 1971 Holden HQ Monaro
Posted: Sun May 07, 2006 3:29 am
Name: Kris
Vehicle: 1971 Holden HQ Monaro
Engine: 400 ci Pontiac V8, gasket matched to FP1233 #16 heads with Ferrea 6000series valves, intakes cut back to 30° seats, exhaust crossover alloy filled and bowls re-shaped, tomahawk intake machined to take Bosch injectors, custom Comp Cams solid (244/236 @ 050) w/yella terra 1.65 roller rockers, custom ceramic dipped headers 1 3/4" primaries into 3" collector, 2.5" all the way to the back with 2.5" X-pipe.
Ignition: MSD Probillet Distributor (VR Input circuit), VB921 coil driver firing an MSD6AL Ignition box which inturn fires a Blaster SS coil through 8.5mm MSD spiral core leads.
Injection: Multiport Megasquirt-II, 42 lb/hr bosch injectors in alternating fire mode, modified tomahawk intake, custom made plenum (~6.4L volume) utilising a 78mm throttle body from an LS1 small block, adjustable aeromotive fuel pressure regulator, -8AN fuel lines from front to back.
Description: Toyota Supra 5-speed trans, 3.5 9" LSD, trunk mounted battery, black paintwork.
Other: A big thankyou to Bruce & Al for developing such a mental engine management system! I started this project 8 months ago, gradually building it all and learning enough to make my brain explode in the process!!! Love your work!
Vehicle: 1971 Holden HQ Monaro
Engine: 400 ci Pontiac V8, gasket matched to FP1233 #16 heads with Ferrea 6000series valves, intakes cut back to 30° seats, exhaust crossover alloy filled and bowls re-shaped, tomahawk intake machined to take Bosch injectors, custom Comp Cams solid (244/236 @ 050) w/yella terra 1.65 roller rockers, custom ceramic dipped headers 1 3/4" primaries into 3" collector, 2.5" all the way to the back with 2.5" X-pipe.
Ignition: MSD Probillet Distributor (VR Input circuit), VB921 coil driver firing an MSD6AL Ignition box which inturn fires a Blaster SS coil through 8.5mm MSD spiral core leads.
Injection: Multiport Megasquirt-II, 42 lb/hr bosch injectors in alternating fire mode, modified tomahawk intake, custom made plenum (~6.4L volume) utilising a 78mm throttle body from an LS1 small block, adjustable aeromotive fuel pressure regulator, -8AN fuel lines from front to back.
Description: Toyota Supra 5-speed trans, 3.5 9" LSD, trunk mounted battery, black paintwork.
Other: A big thankyou to Bruce & Al for developing such a mental engine management system! I started this project 8 months ago, gradually building it all and learning enough to make my brain explode in the process!!! Love your work!