Opel corsa A 20XEJ
Posted: Tue Dec 11, 2007 4:59 am
1991 opel corsa A GSI (Nova GSI) with 4 cylinder 2Ltr 16 valves engine
Engine name : 20XEJ
Stock power & torque (manufacturer data) : 156hp@6000rpm 205Nm@4800rpm
Rebuilt engine : standard parts, 60mm exhaust system
MS2 with PCB V3.0 and original B&G V2.881 code : VR tach input from the 60-2 wheel, direct coil control with standard engine distributor, all sensor are standard, siemens IAT sensor
Stock 214cc/min injectors
3.5bar fuel pressure
Innovate LC-1 lambda controller
KnockSenseMS
At the moment I'm waiting for somes hoses to mount my K&N air filter.
Tuning is in progress, but sometimes (very fewly) MS lose tach signal without reseting. Going to view this on a scope to solve this issue.
http://img134.imageshack.us/img134/6582/20xems1mk4.jpg
http://img105.imageshack.us/img105/9408/20xems2zp9.jpg
Engine name : 20XEJ
Stock power & torque (manufacturer data) : 156hp@6000rpm 205Nm@4800rpm
Rebuilt engine : standard parts, 60mm exhaust system
MS2 with PCB V3.0 and original B&G V2.881 code : VR tach input from the 60-2 wheel, direct coil control with standard engine distributor, all sensor are standard, siemens IAT sensor
Stock 214cc/min injectors
3.5bar fuel pressure
Innovate LC-1 lambda controller
KnockSenseMS
At the moment I'm waiting for somes hoses to mount my K&N air filter.
Tuning is in progress, but sometimes (very fewly) MS lose tach signal without reseting. Going to view this on a scope to solve this issue.
http://img134.imageshack.us/img134/6582/20xems1mk4.jpg
http://img105.imageshack.us/img105/9408/20xems2zp9.jpg
