mustang 2.3L early dis
Re: mustang 2.3L early dis
megasquirt controls the negative end of the idle valve. so it needs its own 12v input to it.
also check the relay board, make sure you have the relay jumped, or its just trying to flip the relay wich wont realie work, lol
theres a write up on it here
http://www.diyautotune.com/tech_article ... ng_5_0.htm
goto the" PWM IAC Wiring" section,
as far as settings goes, i went through and looked an i had mine set to 320 hz,
you might have a inversed idle valve, im not sure exactly wich is wich but one will be full on at 0% and one will be full off at 0%
try both
-
- MegaSquirt Newbie
- Posts: 9
- Joined: Thu Nov 26, 2009 4:23 pm
Re: mustang 2.3L early dis
i have the same IAC as you so ill just use your setting thanks a lot
-
- MegaSquirt Newbie
- Posts: 9
- Joined: Thu Nov 26, 2009 4:23 pm
Re: mustang 2.3L early dis
ive burnt my second one out now and im not sure why ....
Re: mustang 2.3L early dis
i'd check the mica sheet thats under it, and make sure its not grounding itself out.
-
- MegaSquirt Newbie
- Posts: 9
- Joined: Thu Nov 26, 2009 4:23 pm
Re: mustang 2.3L early dis
thanks anyways