Turbo Mitsubishi Mighty Max
-
- MegaSquirt Newbie
- Posts: 2
- Joined: Mon Sep 28, 2009 1:42 pm
Turbo Mitsubishi Mighty Max
http://vimeo.com/6786786
93 JDM spec pullout 4g63t motor
510cc Yellow top injectors
big 16g
Jeremy (special) O2 housing / downpipe.
Ebay Tubular exhaust manifold
Ebay hard pipe kit
Ebay Intercooler
Ebay dual manual boost controller
In tank Fuel pump from my 6.0 GTO
Megasquirt 1 pcb 3.0
Innovate LC1 Wideband
Custom harness
SPEC 2+ clutch / pressure plate
Stock Mitsu narrow block Trans
Everything else, STOCK
2 years on and off working, learning, and tinkering.
Realizing how little I actually know -- Priceless.
Making it all work with little to no money invested. -- PRICELESS!__________________
-
- MegaSquirt Newbie
- Posts: 2
- Joined: Mon Sep 28, 2009 1:42 pm
Re: update Turbo Mitsubishi Mighty Max
Just went a did a full 2nd gear pull and hit 190 kpa / 13psi on spring pressure alone. THAT was a kick in the bum.
I rolled into the throttle because I did not know what to expect and it actually hooked pretty well considering it is a open diff. It pulls damn near as hard as my GTO as it climbs. I only let it hit my temp rev limiter @ 7k instead of the full 8k.
It's a totally different way to drive that I have to get used to... the Torque hit is just NOT there like the high stall 6 liter in my goat, but I am ADDICTED for sure!