Page 1 of 1
Cody Forbes, Audi 5000 Turbo Quattro
Posted: Thu Apr 29, 2004 2:24 pm
by Haudi
Name: Cody Forbes
Vehicle: Audi 5000 Turbo Quattro
Engine: Stock MC-1 2.2l 5cyl turbocharged
Injection: Multi-port using 5 42lb/hr Bosch low-z injectors
Description: My second MS'ed 5000TQ. Did the install because I hate
CIS, I wanted to run a bit more boost, and I hate CIS.
Website: 5000tq.com
Cody Forbes, Audi 5000 Turbo Quattro
Posted: Mon Aug 16, 2004 3:13 pm
by Haudi
Update:
New website, 500tq.com.
Currenly running:
Ported Cyl head
Ported exaust manifold
KKK K26/K27 hybrid turbo
Blau 272 degree cam
Autotech 8000rpm valve springs
150hp three stage wet nitrous system
Cody Forbes, Audi 5000 Turbo Quattro
Posted: Thu Sep 09, 2004 7:21 pm
by Haudi
385hp to the wheels as of last week!
Posted: Thu Aug 17, 2006 5:07 pm
by Haudi
Re: Cody Forbes, Audi 5000 Turbo Quattro
Posted: Sat Oct 23, 2010 10:20 am
by Haudi
Another update.
I'm now running Coil-on-plug using BMW coils, Glens coil driver board, the MSExtra board, and completely standalone. Ignition input is 5+1 via 5 dowel pin installed in the flywheel read by the stock VR TDC sensor plus one dowel pin installed in the end of the camshaft where the distributor drive used to be and a Ford VR sensor.
Also my MS is mounted inside the stock MAC-11 ECU case and using the stock wiring harness.
With all of the updates I expect over 500whp and will have it on the dyno sometime this winter.